Mitsubishi ECU Up for sale is a Working, in excellent condition Mitsubishi Eclipse / Eagle Talon Engine ECU. This was removed from a recent crash damaged 1997 eclipse. This is a recent MOPAR Replacement control unit. Works with 1997+ 2.0 Liter DOHC models with a manual transmission. My list also says this should work with the 2.0 liter Dodge Avenger / Chrysler searing Coupe models with the same 2.0 Liter engine (DSM manufactured).- perhaps others as well. See part numbers at the top of the listing and check this against your original. This unit offers a 30 day functionality warranty. The last 2 letters in the part number are the software version, and not important.2.0 / MT ENGINE CONTROL ECU ECM PCM Should interchange with-5293013AD 5293013AC 5293013AB 5293013AA1-R5293013AD As always with this type of component your best bet is to match the part number to the one on your original ECU. A faulty ECU is one of the most common no start or random stalling problems with these cars. These can also cause issues with erroneous check engine lights, idle control problems as well as emission control & cold or hot start problems. I have also seen fuel pump relay turn on faults (ECU won't turn on the fuel pump), as well as an condition where the high speed injector driver has failed. This causes the car to sit and idle fine, but it won't accelerate.If your car does not have these issues but you intend to keep it a while, I recommend our customers keep an extra ECU in the trunk. These units now have to be special ordered from most dealers new for big $$ (often times over $1000!), and you can never find one when you need one. Even now finding a good one second hand is getting to be quite difficult as these cars get older.